How to Install a Ghost Immobiliser
A ghost immobiliser is a hidden security system that protects your vehicle from hacking and key cloning. autowatch ghost 2 immobiliser stops the engine from running until a PIN code has been entered. This could be as long as 20 characters.
It is unnoticeable by thieves and they are unlikely to think about this additional layer of security. Certain systems come with an app which allows the owner to disarm their immobiliser if they forget their PIN or use service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is a cutting-edge security system, can be integrated directly into the ECU of your vehicle. It provides a discreet barrier against thieves. It is highly efficient and user-friendly. This makes it an excellent addition to your vehicle's arsenal of security. Like all anti-theft devices it's not foolproof and requires regular maintenance in order to function effectively. Fortunately, this guide will aid you in getting the most out of your Ghost 2 Immobiliser.
CAN (Controller Area Network), a robust serial networking that allows microcontrollers to communicate with each other over small distances. A central control unit is not required. It is designed to multiplex electrical wiring in vehicles, saving on copper. It has many advantages including low cost and easy use.
In modern vehicles, the CAN protocol is used to connect with a variety of systems, including the engine management system (EMS), steering module, transmission controller, air conditioning controls and many more. It also carries sensor information like speed sensors and other inputs, to regulate the various features of the car. The CAN bus is able to monitor the status of these different components and could stop the vehicle from starting when it is in an unsafe condition.
While the CAN bus can be used for a variety of purposes, it's crucial to understand how it operates and how it's secured. autowatch ghost immobiliser is possible to add new features to a vehicle by using CAN bus, however it's crucial to safeguard it against hackers and other threats. Installing a firewall, and monitoring your CAN-bus using software is the best method to accomplish this.
Ghost2's control unit is hidden in the dashboard of the car or in the wiring harness, which prevents a thief from physically tampering it. It is impossible to reset a pin code or emergency code without access to the car.
If you need to give your car away for servicing, valet parking, or any other reason, you can use the Transport Mode. This feature disables both the keyfob and the ignition functions of the Ghost immobiliser. It will only be activated after the car has reached 31 mph for a time of 15 minutes.
How do I create a PIN code
The Ghost immobiliser is an effective security system that guards your vehicle from thieves. The cutting-edge technology uses the PIN code to shut down the engine and stop it from running without the proper code or an authorized fob/mobile device. Its discreet design ensures that the system is unnoticeable and provides unrivaled security against theft. The system is TASSA certified and could save you substantial amounts on your car insurance.
During installation, Ghost enters a "learning mode" to record the sequences of buttons that are pressed to create unique pin codes. After the pin code is created and the installer has completed its work, it will guide you through the steps to activate the system. Once activated it will Ghost system will turn off the starter motor of your vehicle until a valid pin code is entered or the vehicle is switched into transport mode. This makes it very difficult for thieves to copy or hack into your vehicle's start system.
It is simple to install it is easy to install a Ghost immobiliser, but you must follow the precise instructions provided in the user's manual to ensure proper performance. Hand tools are essential in making the perfect connections and a multimeter will aid in checking electrical values. Insulation tape, heat shrink tubing, and cable ties are a good option to protect exposed wiring. Test the system on a regularly to spot any issues that could be.
It is crucial to check the system one final time prior to turning on the ignition. Ghost immobilisers will arm themselves after 3 to 30 second, dependent on the model of your vehicle. The system also comes with a Service/Valet Mode that allows you to temporarily disable the system to service or valet parking.
The immobiliser should be hidden in a hidden location beneath the steering wheel or on the dashboard. Make use of a small piece of duct tape or paint over the CAN H and L wires to make them easier to find during testing. In auto ghost immobiliser and L wires should be connected to a source of power that provides continuous 12V. It is also crucial to check the connections following testing, as misidentifying these wires could cause the system to malfunction.
Invoking the system
A ghost immobiliser stops the car from starting unless you press certain buttons on the vehicle, usually on the steering wheel or door panel, or the central console. The sequence is decided by the user and can be altered at any time. Once activated, the system will not be deactivated. This makes it an ideal choice for those who want to safeguard their vehicle from theft.
The system is designed to be undetectable, meaning it cannot be detected by modern diagnostics or code-grabbing technology. It also doesn't broadcast out radio frequencies which makes it harder for thieves to detect the device.
If the device is discovered, it will stop the engine from running. It will also sound an alarm to scare the burglar away. The device can be used to track the location of a vehicle and assist in the recovery of the vehicle in the event that it has been stolen.
If you are interested in a ghost-immobiliser, contact the experts at Car Specalist Customs to get an estimate and discuss your options. We are certified to install ghost immobilisers for your vehicle. We will make sure that it is placed in a place that is difficult to access. We can also install other security measures, like a kill switch and wheel lock, to protect your vehicle from theft.
Disarming the System
It's important to understand how to disable the Ghost immobiliser if it is installed in your vehicle. It can be used in case you forget your keys or the battery in your car dies. The system uses an individual PIN code that only you know, and the immobiliser will not be able to start your vehicle unless you enter this code. Pressing a combination buttons on the dashboard or steering wheel is the most efficient method to enter your code. This is a far simpler method than using the key fob, and it also prevents anyone from copying your remote.
Ghost2 is noninvasive unlike other immobilisers from the aftermarket that require cutting wires for installation. It also works with the CAN bus system of your vehicle in order to function. Its most distinctive feature is that it shuts off the engine without affecting normal vehicle functions. This makes it extremely difficult for thieves to use signal boosts or to clone keys for cars. Moreover, it does not emit radio frequencies, meaning thieves can't detect the system.
The Ghost system also comes with the Transport Mode that allows you to temporarily disable the security system in situations such as transportation or servicing. This feature is ideal if you are lending your vehicle to someone else, without sharing your PIN code or if your vehicle needs to be kept secure while you drive it. To activate the Transport Mode, press the service button 5 times within a period of 2 seconds. The Ghost system will confirm activation with 5 signal indicators.
Save the emergency code outside your vehicle in a safe location. If you happen to encounter a situation where you are locked out of your vehicle, you can contact the technician or the company who installed the system and they'll provide you with the code. If they are not able to contact you You can always attempt to contact an authorized dealer however this will require verification procedures and could result in additional costs.
This system isn't just practical, but it can also help protect your vehicle from theft and lower insurance costs. Many insurance companies offer reduced monthly premiums, or even financial incentives to install this anti-theft system.
